Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Introduction

If your ProScan's audio is not working, use this guide to replace the speakers. This guide will require soldering.

  1. Remove both 4 mm screws on the top of the tablet with a PH00 screw driver.
    • Remove both 4 mm screws on the top of the tablet with a PH00 screw driver.

  2. Use the blue plastic opening tool to pry open the tablet.
    • Use the blue plastic opening tool to pry open the tablet.

    • You will hear popping sounds. That's okay.

    • Be careful when using the blue plastic opening tool on the side of the device near the speakers, as there is a wire here that connects the speakers to the motherboard.

  3. SAUTEZ LA MISE À NIVEAU

    Économisez en réparant avec un kit tout-en-un.

    Fix Kits pour iPhone

    SAUTEZ LA MISE À NIVEAU

    Économisez en réparant avec un kit tout-en-un.

    Fix Kits pour iPhone
  4. Pull back the protective tape from the two wires that connect the speakers to the motherboard.
    • Pull back the protective tape from the two wires that connect the speakers to the motherboard.

  5. Use the soldering tool to remove speaker wires from motherboard.
    • Use the soldering tool to remove speaker wires from motherboard.

    • Soldering tool will get hot, handle with care.

  6. If needed use a plastic opening tool to remove speaker from the speaker port on the tablet. If needed use a plastic opening tool to remove speaker from the speaker port on the tablet.
    • If needed use a plastic opening tool to remove speaker from the speaker port on the tablet.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Laura Kneeshaw

Membre depuis le 12/01/2016

423 Réputation

2 tutoriels rédigés

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 216