Introduction

If the side guns on your drone have broken off after a hard landing, use this guide to learn how to replace them. Replacement side guns should be included in the original packaging, and no tools are required for the replacement because the screw driver is included.

  1. Identify which side gun has broken off.
    • Identify which side gun has broken off.

  2. Access the screwdriver included in the remote control.
    • Access the screwdriver included in the remote control.

  3. %Livraison gratuite pour toute commande supérieure à 100 $US ou contenant un Pro Tech Toolkit !

    Parcourez notre boutique
  4. Flip the drone upside down.
    • Flip the drone upside down.

  5. Use the screwdriver to remove the screw holding the side gun in place. Each side gun has a corresponding screw similar to the one shown.
    • Use the screwdriver to remove the screw holding the side gun in place. Each side gun has a corresponding screw similar to the one shown.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Miranda Brinkley

Membre depuis le 22/10/2018

413 Réputation

3 tutoriels rédigés

Équipe

UC Davis, Team S11-G5, Lore Fall 2018 Membre de l'équipe UC Davis, Team S11-G5, Lore Fall 2018

UCD-LORE-F18S11G5

3 membres

4 tutoriels rédigés

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 5

Total : 37