Aller au contenu principal

Protocol Galileo Stealth Light Emitting Diode (LED) Replacement

Ce dont vous avez besoin

  1. Protocol Galileo Stealth Light Emitting Diode (LED) Replacement, Housing: étape 1, image 1 de 2 Protocol Galileo Stealth Light Emitting Diode (LED) Replacement, Housing: étape 1, image 2 de 2
    • Remove the 8mm long Phillips #0 screws (24 total) from the lower housing unit.

    • Take care to place the screws in a safe place to prevent losing them.

  2. Protocol Galileo Stealth Light Emitting Diode (LED) Replacement: étape 2, image 1 de 1
    • Separate the upper and lower housing units by lightly pulling the two housing units apart.

  3. Protocol Galileo Stealth Light Emitting Diode (LED) Replacement, Light Emitting Diode (LED): étape 3, image 1 de 1
    • Remove 6mm Phillips #0 screw from the LED strip.

  4. Protocol Galileo Stealth Light Emitting Diode (LED) Replacement: étape 4, image 1 de 1
    • Remove the LED strip from the housing by applying light pressure away from the lower housing with the plastic opening tool.

    • Take care not to damage the LED strip when removing it from the lower housing.

  5. Protocol Galileo Stealth Light Emitting Diode (LED) Replacement: étape 5, image 1 de 1
    • Unclip the wire plug from the motherboard by applying light pressure away from the motherboard with the plastic spudger.

    • Avoid damaging the wire plug, wires, and motherboard when removing the wire plug.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Matthew Selting

Membre depuis le 02/15/18

432 Réputation

4 tutoriels rédigés

Équipe

UW Stout, Team S8-G4, Ogden Spring 2018 Membre de l'équipe UW Stout, Team S8-G4, Ogden Spring 2018

UWSTOUT-OGDEN-S18S8G4

4 membres

6 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 137