Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the 8mm long Phillips #0 screws (24 total) from the lower housing unit.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Separate the upper and lower housing units by lightly pulling the two housing units apart.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove 6mm Phillips #0 screw from the LED strip.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the LED strip from the housing by applying light pressure away from the lower housing with the plastic opening tool.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Unclip the wire plug from the motherboard by applying light pressure away from the motherboard with the plastic spudger.
-