Aller au contenu principal

Protocol Neo-Drone AP Controller Switch Replacement

Ce dont vous avez besoin

  1. Protocol Neo-Drone AP Controller Switch Replacement, Controller Switch: étape 1, image 1 de 2 Protocol Neo-Drone AP Controller Switch Replacement, Controller Switch: étape 1, image 2 de 2
    • Remove the single 6.5mm Phillips #1 screw from the battery cover.

    • Remove the three AAA batteries.

  2. Protocol Neo-Drone AP Controller Switch Replacement: étape 2, image 1 de 2 Protocol Neo-Drone AP Controller Switch Replacement: étape 2, image 2 de 2
    • Remove seven 6.5mm Phillips #1 screws from the back panel.

    • Pull the back panel up to separate it from the front panel.

  3. Protocol Neo-Drone AP Controller Switch Replacement: étape 3, image 1 de 2 Protocol Neo-Drone AP Controller Switch Replacement: étape 3, image 2 de 2
    • Remove three 4.5mm Phillips #1 screws from the motherboard.

    • Pull the motherboard out of the case.

  4. Protocol Neo-Drone AP Controller Switch Replacement: étape 4, image 1 de 2 Protocol Neo-Drone AP Controller Switch Replacement: étape 4, image 2 de 2
    • Here is a link to the iFixit Soldering Guide

    • Use a soldering iron to remove the solder form the motherboard.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Andrew

Membre depuis le 07/05/18

291 Réputation

2 tutoriels rédigés

Équipe

IUPUI, Team S2-G3, Harley Summer 2018 Membre de l'équipe IUPUI, Team S2-G3, Harley Summer 2018

IUPUI-HARLEY-SU18S2G3

4 membres

2 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 2

7 derniers jours : 4

30 derniers jours : 9

Total : 228