Réparez vos affaires Communauté Boutique

Protocol Slipstream EVO Propeller Guards Replacement

Ce dont vous avez besoin

  1. Protocol Slipstream EVO Propeller Guards Replacement, Propeller Guards: étape 1, image 1 de 1

    • With the drone flat on the ground, identify which propeller guard you will be replacing.

    • The front of the drone is where there are no wires exposed.

    Modifier

  3. Protocol Slipstream EVO Propeller Guards Replacement: étape 2, image 1 de 2 Protocol Slipstream EVO Propeller Guards Replacement: étape 2, image 2 de 2

    • With the plastic opening tool, pry the side of the guard closest to the front or the back of the drone depending on where you decided to start from.

    • After prying off one side of the guard, pushing down on the same side will release the other side of the clip.

    • Repeat this step for the following side as needed.

    Modifier

  4. Protocol Slipstream EVO Propeller Guards Replacement: étape 3, image 1 de 2 Protocol Slipstream EVO Propeller Guards Replacement: étape 3, image 2 de 2

    • With the replacement guard line up the clips and push the clips into place.

    • After the guard has been attached to the drone, pinch the clips as you push the guards to ensure they are secured.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 4 autres contributeurs

Michael Dang

Membre depuis le 04/10/17

301 Réputation

3 tutoriels rédigés

Badges: 3

Équipe

UW Tacoma, Team S3-G3, Liner Spring 2017 Membre de l'équipe UW Tacoma, Team S3-G3, Liner Spring 2017

UWT-LINER-S17S3G3

4 membres

3 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 1

30 derniers jours : 8

Total : 152