Introduction

This guide will intructs you how to replace the propellers on the Protocol TerraCopter Evo. In order to access the front wheels of the drone , you have to remove these propellers first.

  1. Using a Phillips #0 screwdriver, remove the four screws connecting the propellers to the device.
    • Using a Phillips #0 screwdriver, remove the four screws connecting the propellers to the device.

  2. %Livraison gratuite pour toute commande supérieure à 100 $US ou contenant un Pro Tech Toolkit !

    Parcourez notre boutique
  3. Hold the propellers gently and pull the propellers out of the drone . Hold the propellers gently and pull the propellers out of the drone .
    • Hold the propellers gently and pull the propellers out of the drone .

Conclusion

To reassemble your device, follow these instructions in reverse order.

Tri Luong

Membre depuis le 17/01/2018

327 Réputation

3 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 60