Aller au contenu principal

Introduction

How to access and replace the motherboard. Note that items such as the charging port, sleep button and SD card reader are built on to the motherboard.

Pièces

Aucune pièce spécifiée.

  1. Start by turning the tablet over with the screen down. Carefully use a plastic opening tool to pry the cover off. Start from the corner opposite the hibernate button.
    • Start by turning the tablet over with the screen down. Carefully use a plastic opening tool to pry the cover off. Start from the corner opposite the hibernate button.

  2. Pick up the magnets from the bottom edge of the tablet next to the keyboard connection and put them in a place that they will not get lost. Then carefully remove all 4 strips of electrical tape. Pick up the magnets from the bottom edge of the tablet next to the keyboard connection and put them in a place that they will not get lost. Then carefully remove all 4 strips of electrical tape.
    • Pick up the magnets from the bottom edge of the tablet next to the keyboard connection and put them in a place that they will not get lost. Then carefully remove all 4 strips of electrical tape.

  3. Using a small plastic opening tool; genteelly pull the connection off of the motherboard. Using a small plastic opening tool; genteelly pull the connection off of the motherboard.
    • Using a small plastic opening tool; genteelly pull the connection off of the motherboard.

  4. Remove silver protective sticker and set to the side. Ensure all ribbon cables and other connectors are disconnected from mother board. Ensure all ribbon cables and other connectors are disconnected from mother board.
    • Remove silver protective sticker and set to the side.

    • Ensure all ribbon cables and other connectors are disconnected from mother board.

  5. There are 4 small screws connecting the motherboard to the frame of the device. Take a PH00 bit screw driver to remove these screws. There are 4 small screws connecting the motherboard to the frame of the device. Take a PH00 bit screw driver to remove these screws.
    • There are 4 small screws connecting the motherboard to the frame of the device. Take a PH00 bit screw driver to remove these screws.

  6. Gently and carefully lift motherboard straight up from frame.
    • Gently and carefully lift motherboard straight up from frame.

Conclusion

To reassemble your device, follow these instructions in reverse order.

stephen Munchinsky

Membre depuis le 01/04/2017

771 Réputation

7 tutoriels rédigés

Équipe

Gateway Community College Team 1 BPC270 36301 Membre de l'équipe Gateway Community College Team 1 BPC270 36301

Community

4 membres

7 tutoriels rédigés

3 commentaires

tell me which battery is suitable ?

Иван Шульга - Réponse

Hi

I would like to request for my tablet bios.bin EM_i8211 V6.1 (this code on board )

My tablet is fail bios

Please help me,

Ye Yint Aung - Réponse

Hi

My tablet bois missing when it was updating …

MB model is EM_i8211 V6.1

Please help me for find bios file …

tnx alot …

p30emaile@yahoo.com

Nima khalaji - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 3

30 derniers jours : 7

Total : 765