Introduction
If you install the sim card in the sim drawer the iPad 2 and it says "no sim card installed", use this guide to repair an iPad 2 that does not recognize the SIM after installation.
Ce dont vous avez besoin
-
-
In this case, check all traces as shown on picture with a volt/ohmmeter.
-
If some are broken make a shunt, as in the second picture to get the sim reader fully working.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
2 autres ont terminé cette réparation.
Merci à ces traducteurs :
100%
Ces traducteurs nous aident réparer le monde ! Vous voulez contribuer ?
Commencez à traduire ›