Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Pièces & Outils

  1. Start by unlocking the right locking latch. Then, by simultaneously unlocking the left latch, lift the battery out of its socket.
    • Start by unlocking the right locking latch.

    • Then, by simultaneously unlocking the left latch, lift the battery out of its socket.

  2. Begin by spotting the dummy memory card. Then, remove it and put it on your workplan.
    • Begin by spotting the dummy memory card.

    • Then, remove it and put it on your workplan.

  3. Manta Precision Bit Set

    112 embouts pour toute réparation.

    Upgrade Your Toolbox

    Manta Precision Bit Set

    Upgrade Your Toolbox
  4. Locate the 15 screws that hold the bottom cover of the device in place. Unscrew them and place them on your work surface. Then, un-clip the bottom cover, starting with the side shown in the third picture.
    • Locate the 15 screws that hold the bottom cover of the device in place.

    • Unscrew them and place them on your work surface.

    • Then, un-clip the bottom cover, starting with the side shown in the third picture.

  5. Find and separate the spring blades that maintain the memory module in place (right). Find and separate the spring blades that maintain the memory module in place (left). Remove the memory module (RAM) from its connector.
    • Find and separate the spring blades that maintain the memory module in place (right).

    • Find and separate the spring blades that maintain the memory module in place (left).

    • Remove the memory module (RAM) from its connector.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Merci à ces traducteurs :

100%

Ces traducteurs nous aident réparer le monde ! Vous voulez contribuer ?
Commencez à traduire ›

Felice Suglia

Membre depuis le 15/06/2013

14 874 Réputation

150 tutoriels rédigés

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 156