Réparez vos affaires Communauté Boutique

RCA 8 Apollo Back Panel Replacement

Introduction

Use this guide to replace the back panel on your RCA Apollo 8 tablet (identified with model number RCT6573W23).

Ce dont vous avez besoin

  1. RCA 8 Apollo Back Panel Replacement, Back Panel: étape 1, image 1 de 1

    • Before you begin, discharge your tablet battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured.

    • Power off your tablet before beginning to disassemble.

    Traduire

  3. RCA 8 Apollo Back Panel Replacement: étape 2, image 1 de 2 RCA 8 Apollo Back Panel Replacement: étape 2, image 2 de 2

    • Insert an iFixit opening tool into the gap between the tablet and back panel.

    • Using a combination of iFixit opening tools and iFixit opening picks, pry the tablet upward around its perimeter to release it from the plastic rear case.

    • If inserted too far, an opening pick can damage your device. It is helpful to mark the edge with an opening pick, or opening tool at a depth that will not damage the inner contents of the tablet.

    Traduire

  4. RCA 8 Apollo Back Panel Replacement: étape 3, image 1 de 2 RCA 8 Apollo Back Panel Replacement: étape 3, image 2 de 2

    • Disconnect the red and black speaker wires from the tablet.

    • The front and back of the tablet will be disconnected.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 3 autres contributeurs

Chantel Pfiefer

Membre depuis le 04/15/24

219 Réputation

2 tutoriels rédigés

Badges: 4

+ 1 badge de plus

Équipe

Casper College, Team 1-1, Lareau Spring 2024 Membre de l'équipe Casper College, Team 1-1, Lareau Spring 2024

CASC-LAREAU-S24S1G1

3 membres

4 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 13

Total : 40