Ce tutoriel a des changements plus récents. Passer à la dernière version non vérifiée.
Introduction
This guide will instruct you to replace the effect button circuit board on the RCA CC310.
Ce dont vous avez besoin
-
-
Remove the six 7.9mm Phillips #0 screws on the back and bottom.
-
Remove the one 3.8mm Phillips #0 screw on the bottom.
-
Remove the two 7.5mm Phillips #0 screws on the back and bottom.
-
-
-
-
Unplug the two cables on the bottom of the effect button circuit board.
-
Unplug the cable at the top left side of the motherboard.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.