Aller au contenu principal

Ce tutoriel a des changements plus récents. Passer à la dernière version non vérifiée.

RCA CC310 Main Motherboard Replacement

Ce dont vous avez besoin

  1. RCA CC310 Main Motherboard Replacement, Disassembling RCA CC310 Left Cover: étape 1, image 1 de 2 RCA CC310 Main Motherboard Replacement, Disassembling RCA CC310 Left Cover: étape 1, image 2 de 2
    • Remove the six 7.9mm Phillips #0 screws on the back and bottom.

    • Remove the one 3.8mm Phillips #0 screw on the bottom.

    • Remove the two 7.5mm Phillips #0 screws on the back and bottom.

  2. RCA CC310 Main Motherboard Replacement: étape 2, image 1 de 2 RCA CC310 Main Motherboard Replacement: étape 2, image 2 de 2
    • Remove 5.8mm Phillips #1 screw from the side button panel.

    • Slide the viewfinder all the way to the right and remove the 7.9mm Phillips #0 screw.

  3. RCA CC310 Main Motherboard Replacement: étape 3, image 1 de 2 RCA CC310 Main Motherboard Replacement: étape 3, image 2 de 2
    • Pry along the seam on the top side near the buttons with a spudger.

  4. RCA CC310 Main Motherboard Replacement: étape 4, image 1 de 2 RCA CC310 Main Motherboard Replacement: étape 4, image 2 de 2
    • Pull the left panel away from the rest of the camcorder.

    • Unplug the red speaker cable located at the rear of the device.

    • Be careful to not pull too hard. The speaker cable is still connected to the panel and it can rip.

  5. RCA CC310 Main Motherboard Replacement, Main Motherboard: étape 5, image 1 de 2 RCA CC310 Main Motherboard Replacement, Main Motherboard: étape 5, image 2 de 2
    • Pull back the plastic tabs along the edges of the motherboard.

    • Disconnect all the cables along the left side of the motherboard.

  6. RCA CC310 Main Motherboard Replacement: étape 6, image 1 de 2 RCA CC310 Main Motherboard Replacement: étape 6, image 2 de 2
    • Disconnect all cables along the bottom of the motherboard.

    • Pull the motherboard away from the camcorder.

  7. RCA CC310 Main Motherboard Replacement: étape 7, image 1 de 1
    • Desolder the two black wires holding the motherboard to the camcorder using a soldering iron.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Oliver Adams

Membre depuis le 01/19/11

629 Réputation

6 tutoriels rédigés

Équipe

Cal Poly, Team 5-20, Amido Winter 2011 Membre de l'équipe Cal Poly, Team 5-20, Amido Winter 2011

CPSU-AMIDO-W11S5G20

4 membres

7 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 7

Total : 2,695