Introduction

This guide may be of use if the sound no longer works properly. For speaker accessibility, the battery will have to be removed.

  1. Remove nine 4.8mm screws around the case with a JIS #00 screwdriver.
    • Remove nine 4.8mm screws around the case with a JIS #00 screwdriver.

    Ajouter un commentaire

  2. Insert plastic opening tool and slide it around the edges until the cover starts to pop off. It may be necessary to go over each side multiple times in order to pop the cover off.
    • Insert plastic opening tool and slide it around the edges until the cover starts to pop off. It may be necessary to go over each side multiple times in order to pop the cover off.

    I bought a set of tools for opening the cover of the tablet but as much as I have tried going around each side, I have been unable to make any progress. I can’t get a tool to even begin to fit in between the cover and the tablet. Any suggestions?

    Thomas Kiker - Réponse

    • Remove cover completely.

    Ajouter un commentaire

    • Disconnect battery cable from the motherboard.

    Ajouter un commentaire

  3. Répandez la magie de Noël
    Obtenez 12 $ de réduction sur les commandes de 50 $ ou plus avec le code FIXMAS12
    Répandez la magie de Noël
    Obtenez 12 $ de réduction sur les commandes de 50 $ ou plus avec le code FIXMAS12
    • Pull the thin black keyboard connector off and set it aside.

    Ajouter un commentaire

    • Disconnect the thick black band (bus) using a plastic opening tool or fingernail.

    Ajouter un commentaire

    • Use nylon spudger tool or plastic card to separate battery from the case.

    Ajouter un commentaire

    • Carefully peel off the battery.

    Ajouter un commentaire

    • Disconnect the speaker cord from the motherboard.

    Ajouter un commentaire

    • Use the plastic spudger to slide the speaker out.

    Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Akitaka Hashimoto

Membre depuis le 27/03/2018

311 Réputation

2 tutoriels rédigés

Équipe

IUPUI, Team S3-G2, Harley Spring 2018 Membre de l'équipe IUPUI, Team S3-G2, Harley Spring 2018

IUPUI-HARLEY-S18S3G2

3 membres

2 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 10

Total : 86