Réparez vos affaires Communauté Boutique

RIDGID R2740 Motherboard Replacement

Introduction

This guide is designed to walk you through step-by-step procedures on how to replace the motherboard on a RIDGID Belt Sander R2740. A damaged motherboard can result in abnormal function of the device or device failure. Motherboard failure can occur due to dust, overheating, and a buildup in debris.

Before working on the RIDGID Belt Sander make sure the power tool is unplugged or disconnected from any power source. Failure to do so may result in electrocution or personal injury while removing the sandbelt. Make sure to read through this guide for additional information before beginning the replacement of the RIDGID Belt Sander R2740 motherboard.

Ce dont vous avez besoin

  1. RIDGID R2740 Motherboard Replacement, Motherboard: étape 1, image 1 de 1

    • Unplug your device before proceeding..

    Traduire

  2. RIDGID R2740 Motherboard Replacement: étape 2, image 1 de 1

    • Orient the sander so the Air Guard logo is facing you.

    • Remove the single Torx TR20 screw.

    Traduire

  4. RIDGID R2740 Motherboard Replacement: étape 3, image 1 de 2 RIDGID R2740 Motherboard Replacement: étape 3, image 2 de 2

    • Orient the device with the left side face up.

    • Using a Phillips #1 bit, unscrew the 3 screws which hold the internal casing in place.

    • Gently remove the belt.

    • Using the Torx TR10 bit, unscrew the 10 screws which hold the external casing in place.

    Traduire

  5. RIDGID R2740 Motherboard Replacement: étape 4, image 1 de 1

    • Gently pull up on the motherboard chip set, pulling it directly from the device.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 5

30 derniers jours : 12

Total : 602