Aller au contenu principal

Rain-X Chipped Windshield Repair

Ce dont vous avez besoin

  1. Rain-X Chipped Windshield Repair, Rain-X Chipped Windshield Repair: étape 1, image 1 de 3 Rain-X Chipped Windshield Repair, Rain-X Chipped Windshield Repair: étape 1, image 2 de 3 Rain-X Chipped Windshield Repair, Rain-X Chipped Windshield Repair: étape 1, image 3 de 3
    • To remove excess glass, scrape over the surface of the chip with the included razor blade.

  2. Rain-X Chipped Windshield Repair: étape 2, image 1 de 2 Rain-X Chipped Windshield Repair: étape 2, image 2 de 2
    • Attach the Rain-X applicator base to the windshield, with the center of the base directly above the chip.

  3. Rain-X Chipped Windshield Repair: étape 3, image 1 de 2 Rain-X Chipped Windshield Repair: étape 3, image 2 de 2
    • Cut the tip of the repair resin bottle using the razor blade.

  4. Rain-X Chipped Windshield Repair: étape 4, image 1 de 3 Rain-X Chipped Windshield Repair: étape 4, image 2 de 3 Rain-X Chipped Windshield Repair: étape 4, image 3 de 3
    • To attach resin chamber, screw the chamber into the center ring of the applicator base.

  5. Rain-X Chipped Windshield Repair: étape 5, image 1 de 1
    • Screw the resin chamber clockwise until it is in contact with the windshield.

  6. Rain-X Chipped Windshield Repair: étape 6, image 1 de 3 Rain-X Chipped Windshield Repair: étape 6, image 2 de 3 Rain-X Chipped Windshield Repair: étape 6, image 3 de 3
    • Apply 3-6 drops of resin from the resin repair bottle into the resin chamber.

  7. Rain-X Chipped Windshield Repair: étape 7, image 1 de 3 Rain-X Chipped Windshield Repair: étape 7, image 2 de 3 Rain-X Chipped Windshield Repair: étape 7, image 3 de 3
    • To add the pressure driver, screw the driver clockwise into the resin chamber.

    • Make sure to tighten almost all the way.

    • Make sure the pressure driver is in contact with the windshield.

  8. Rain-X Chipped Windshield Repair: étape 8, image 1 de 1
    • Set timer for 4-6 minutes - Let the adhesive absorb into the chip for 4-6 minutes.

    • To determine if the repair resin has absorbed properly, look at the glass from a 45 degree angle.

    • After the 4-6 minutes end, unscrew the pressure driver, turning it counter clockwise. Remove it to release any trapped air.

  9. Rain-X Chipped Windshield Repair: étape 9, image 1 de 2 Rain-X Chipped Windshield Repair: étape 9, image 2 de 2
    • Reinsert pressure driver by twisting clockwise.

    • This will discard any air remaining in the chip.

  10. Rain-X Chipped Windshield Repair: étape 10, image 1 de 1
    • To check for remaining damage, look for a dark color to appear.

  11. Rain-X Chipped Windshield Repair: étape 11, image 1 de 1
    • Leave to cure for 5-10 minutes.

  12. Rain-X Chipped Windshield Repair: étape 12, image 1 de 2 Rain-X Chipped Windshield Repair: étape 12, image 2 de 2
    • Once finished curing, remove the resin chamber and the pressure driver by screwing counter clockwise.

  13. Rain-X Chipped Windshield Repair: étape 13, image 1 de 2 Rain-X Chipped Windshield Repair: étape 13, image 2 de 2
    • Remove the applicator by using the tabs on the suction cups.

  14. Rain-X Chipped Windshield Repair: étape 14, image 1 de 2 Rain-X Chipped Windshield Repair: étape 14, image 2 de 2
    • Clean off any excess adhesive from the windshield.

  15. Rain-X Chipped Windshield Repair: étape 15, image 1 de 2 Rain-X Chipped Windshield Repair: étape 15, image 2 de 2
    • Cover the chip gently with a curing strip.

  16. Rain-X Chipped Windshield Repair: étape 16, image 1 de 1
    • Move the car into direct sunlight and leave for 4-6 hours.

    • Remove the curing strip and enjoy.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autres ont terminé cette réparation.

Jeffrey Ritchie

Membre depuis le 10/26/18

286 Réputation

1 tutoriel rédigé

Équipe

UC Davis, Team S1-G8, Bender Fall 2018 Membre de l'équipe UC Davis, Team S1-G8, Bender Fall 2018

UCD-BENDER-F18S1G8

3 membres

1 tutoriel rédigé

Un commentaire

If you do not have a sunny day, what is the best UV wavelength in nm, watts, and length of time to fully cure the resin.

Thanks much!

AZRic - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 6

7 derniers jours : 10

30 derniers jours : 55

Total : 4,635