Aller au contenu principal

Introduction

This guide will show you how to remove a broken or malfunctioning pedal and replace it with a new one for your Raleigh M20.

Pièces

  1. Use an 8" adjustable crescent wrench to fit it into the base of the pedal.
    • Use an 8" adjustable crescent wrench to fit it into the base of the pedal.

  2. Twist the the wrench in a counter -clockwise direction to unscrew the right-side pedal (The chain side). Repeat the process on the other side with a clockwise direction.
    • Twist the the wrench in a counter -clockwise direction to unscrew the right-side pedal (The chain side).

    • Repeat the process on the other side with a clockwise direction.

  3. Turn the wrench continuously until the pedal detaches from the crank arm.
    • Turn the wrench continuously until the pedal detaches from the crank arm.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autres ont terminé cette réparation.

William Beechinor

Membre depuis le 26/09/2012

124 Réputation

1 tutoriel rédigé

Équipe

Cal Poly, Team 7-49, Forte Fall 2012 Membre de l'équipe Cal Poly, Team 7-49, Forte Fall 2012

CPSU-FORTE-F12S7G49

5 membres

5 tutoriels rédigés

Un commentaire

Thanks for info.

lanzofano - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 5

30 derniers jours : 11

Total : 1,579