Aller au contenu principal

Ce tutoriel a des changements plus récents. Passer à la dernière version non vérifiée.

Razer Blade RZ09-0102 Battery Replacement

Ce dont vous avez besoin

  1. Razer Blade RZ09-0102 Battery Replacement, Rear Panel: étape 1, image 1 de 1
    • Before you begin, be sure to turn off your laptop.

    • Using a Torx T5 screwdriver, remove the ten 1/8 inch screws securing the back cover.

    • Remove the back cover.

    I need the screws is there any way I can get them?

    Lupita Muro - Réponse

  2. Razer Blade RZ09-0102 Battery Replacement, Battery: étape 2, image 1 de 2 Razer Blade RZ09-0102 Battery Replacement, Battery: étape 2, image 2 de 2
    • Remove the seven screws holding the battery in place using a Phillips #0 screwdriver.

  3. Razer Blade RZ09-0102 Battery Replacement: étape 3, image 1 de 1
    • Unlock the ZIF connectors securing the right ribbon cable.

    • To unlock a ZIF connector, use an opening tool or your fingernail to flip up the small, hinged locking flap.

    • Carefully pull the two ribbon cables out of their sockets.

  4. Razer Blade RZ09-0102 Battery Replacement: étape 4, image 1 de 1
    • Use an opening tool to unlock the ZIF connector securing the white ribbon over the battery.

    You know where I can buy that kind white ribbon, it hard find anywhere.

    loona.ot12 - Réponse

  5. Razer Blade RZ09-0102 Battery Replacement: étape 5, image 1 de 2 Razer Blade RZ09-0102 Battery Replacement: étape 5, image 2 de 2
    • Carefully pull out the two connectors out of their sockets.

    • Pull parallel to the motherboard, not straight up.

  6. Razer Blade RZ09-0102 Battery Replacement: étape 6, image 1 de 2 Razer Blade RZ09-0102 Battery Replacement: étape 6, image 2 de 2
    • Pull the wide battery connector towards the battery to disconnect it from the motherboard.

    • Pull parallel to the motherboard, not straight up.

  7. Razer Blade RZ09-0102 Battery Replacement: étape 7, image 1 de 2 Razer Blade RZ09-0102 Battery Replacement: étape 7, image 2 de 2
    • Remove the battery from the laptop.

    I lost some of the screws! What are the right replacement screws for the back cover and the battery?

    Anon - Réponse

Conclusion

To reassemble your device, follow these instructions in reverse order.

For optimal performance, after completing this guide, calibrate your newly installed battery.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.

6 autres ont terminé cette réparation.

Nicole Schukow

Membre depuis le 10/03/18

462 Réputation

2 tutoriels rédigés

2 commentaires

Hey Nicole, thank you for writing this fantastic guide. Do you have any recommendations for vendors or websites for this specific battery replacement?

Erfan Moradi - Réponse

My dudes, anyone can tell me what model is the RZ09-0102 battery connector and where to order the motherboard side?

A friends laptop got the connector melted *moisture* and I can’t identify this dense 30-pin oedipus.

Giorgi Kikuashvili - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 12

30 derniers jours : 61

Total : 25,983