Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Using a Torx T5 screwdriver, remove the ten 1/8 inch screws securing the back cover.
-
Remove the back cover.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the seven screws holding the battery in place using a Phillips #0 screwdriver.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Unlock the ZIF connectors securing the right ribbon cable.
-
Carefully pull the two ribbon cables out of their sockets.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Use an opening tool to unlock the ZIF connector securing the white ribbon over the battery.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Carefully pull out the two connectors out of their sockets.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Pull the wide battery connector towards the battery to disconnect it from the motherboard.
-
Annulation : je n'ai pas terminé ce tutoriel.
6 autres ont terminé cette réparation.
2 commentaires
Hey Nicole, thank you for writing this fantastic guide. Do you have any recommendations for vendors or websites for this specific battery replacement?
My dudes, anyone can tell me what model is the RZ09-0102 battery connector and where to order the motherboard side?
A friends laptop got the connector melted *moisture* and I can’t identify this dense 30-pin oedipus.