Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Using a Torx T5 screwdriver, remove the ten 1/8 inch screws securing the back cover.
-
Remove the back cover.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the three black rubber pads that cover the screws holding the fan.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Use the Phillips #0 screwdriver to remove the three 1/4 inch screws.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Disconnect the wire that goes from the fan into the white connector, but leave the wire attached to the fan.
-
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.