Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Using a Torx T5 screwdriver, remove the ten 1/8 inch screws securing the back cover.
-
Remove the back cover.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Using a Phillips #0 screwdriver, remove the six 8 mm screws holding the cooling rod to the motherboard .
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Lift the cooling rod straight up and out of the laptop.
-
Annulation : je n'ai pas terminé ce tutoriel.
2 autres ont terminé cette réparation.