Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Using a Torx T5 screwdriver, remove the ten 1/8 inch screws securing the back cover.
-
Remove the back cover.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Using a Phillips #0 screwdriver, remove the two screws holding down the speaker.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Disconnect the wire by pinching with your fingers and pulling up.
-