Réparez vos affaires Communauté Boutique

Razer Blade Stealth 2017 Speaker Replacement

Introduction

This guide outlines how to replace the speakers in your Razer Blade Stealth if they are broken or malfunctioning. If the speakers are broken, the sound may be warped, unusually quiet, or have a rattling sound. Before replacing, be sure to look at the “Razer Blade Stealth (2017) Troubleshooting” guide for help with various speaker issues. This guide requires some iFixit tools.

Ce dont vous avez besoin

  1. Razer Blade Stealth 2017 Speaker Replacement, Battery: étape 1, image 1 de 2 Razer Blade Stealth 2017 Speaker Replacement, Battery: étape 1, image 2 de 2

    • Before you begin, be sure to turn off your laptop and discharge the battery down to 25%.

    • Use a Torx T5 screwdriver to remove the eight, 3mm screws on the bottom cover of the laptop.

    • Whenever you remove screws from the device, remember to save and label them.

    Modifier

  2. Razer Blade Stealth 2017 Speaker Replacement: étape 2, image 1 de 1

    • Remove the bottom cover of the laptop by sliding it away from the hinge.

    • Do not force the cover up!

    Modifier

  3. Razer Blade Stealth 2017 Speaker Replacement: étape 3, image 1 de 2 Razer Blade Stealth 2017 Speaker Replacement: étape 3, image 2 de 2

    • Use your fingernail to pry up and disconnect the battery from the motherboard.

    Modifier

  5. Razer Blade Stealth 2017 Speaker Replacement: étape 4, image 1 de 1

    • Use a Phillips #00 screwdriver to remove the six, 5mm screws securing the battery.

    Modifier

  6. Razer Blade Stealth 2017 Speaker Replacement: étape 5, image 1 de 2 Razer Blade Stealth 2017 Speaker Replacement: étape 5, image 2 de 2

    • Remove any tape attached to the battery.

    • Use the plastic spudger to pry out the battery.

    Modifier

  7. Razer Blade Stealth 2017 Speaker Replacement, Speaker: étape 6, image 1 de 2 Razer Blade Stealth 2017 Speaker Replacement, Speaker: étape 6, image 2 de 2

    • Use tweezers to disconnect the red and black speaker cables by lifting up on the pin-header.

    • The same process is used for both speaker connections.

    • Do not pull horizontally on the wires!

    Modifier

  8. Razer Blade Stealth 2017 Speaker Replacement: étape 7, image 1 de 2 Razer Blade Stealth 2017 Speaker Replacement: étape 7, image 2 de 2

    • Use a Phillips #00 to remove the two, 4mm screws on each speaker.

    Modifier

  9. Razer Blade Stealth 2017 Speaker Replacement: étape 8, image 1 de 3 Razer Blade Stealth 2017 Speaker Replacement: étape 8, image 2 de 3 Razer Blade Stealth 2017 Speaker Replacement: étape 8, image 3 de 3

    • Use a plastic spudger to pry the speaker(s) away from the chassis.

    • The speakers are glued to the chassis, making them difficult to remove.

    • The same process is used for both speakers.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Auteur

avec 5 autres contributeurs

Helene Willits

Membre depuis le 10/10/19

762 Réputation

6 tutoriels rédigés

Badges: 10

+ 7 badges supplémentaires

Équipe

Cal Poly, Team S11-G3, Regan Fall 2019 Membre de l'équipe Cal Poly, Team S11-G3, Regan Fall 2019

CPSU-REGAN-F19S11G3

4 membres

7 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 2

7 derniers jours : 6

30 derniers jours : 15

Total : 1,091