Réparez vos affaires Communauté Boutique

Razer Huntsman Tournament Edition Port Replacement

Introduction

If your port is either wobbly or non-functional, use this guide to replace it. This guide should take a half hour.

The Razer Huntsman Tournament Edition is a tenkeyless mechanical keyboard. Its USB port is easily swappable, being held in by a screw and a cable.

You must know how to remove the back of the keyboard before beginning this guide.

Ce dont vous avez besoin

  1. Razer Huntsman Tournament Edition Port Replacement, Keycaps: étape 1, image 1 de 1

    • Place the unplugged keyboard on a flat, clean surface appropriate for working on.

    Modifier

  2. Razer Huntsman Tournament Edition Port Replacement: étape 2, image 1 de 2 Razer Huntsman Tournament Edition Port Replacement: étape 2, image 2 de 2

    • Grip the keycap with your keycap puller.

    • You can remove keycaps with your fingers if you don’t have a puller, but the adjacent keycaps must be removed first for sufficient grip.

    Modifier

  3. Razer Huntsman Tournament Edition Port Replacement: étape 3, image 1 de 3 Razer Huntsman Tournament Edition Port Replacement: étape 3, image 2 de 3 Razer Huntsman Tournament Edition Port Replacement: étape 3, image 3 de 3

    • Pull with an upwards force to remove the keycap.

    • Take a moment to clean the area that was previously obscured if it’s dirty.

    • Use gentle force so as not to damage the stabilizers.

    Modifier

  4. Razer Huntsman Tournament Edition Port Replacement, Chassis: étape 4, image 1 de 1

    • Remove all of the keycaps with a keycap puller.

    Modifier

  6. Razer Huntsman Tournament Edition Port Replacement: étape 5, image 1 de 2 Razer Huntsman Tournament Edition Port Replacement: étape 5, image 2 de 2

    • Unscrew the thirteen 6.5 mm screws, using the Phillips #0 screwdriver, that are located in the front panel.

    Modifier

  7. Razer Huntsman Tournament Edition Port Replacement: étape 6, image 1 de 1

    • Use an opening tool to pry open the chassis.

    • Be careful not to use excessive force during this step so the plastic doesn't warp or break.

    Modifier

  8. Razer Huntsman Tournament Edition Port Replacement: étape 7, image 1 de 1

    • Gently lift the front panel off.

    • The front panel should be connected to the USB board. Do not tug the panel off as this may damage other parts.

    Modifier

  9. Razer Huntsman Tournament Edition Port Replacement: étape 8, image 1 de 1

    • Disconnect the internal cable.

    Modifier

  10. Razer Huntsman Tournament Edition Port Replacement, Port: étape 9, image 1 de 2 Razer Huntsman Tournament Edition Port Replacement, Port: étape 9, image 2 de 2

    • Unscrew the board with the port.

    • It should be located on the upper left, held in by two 6.5mm Phillips #0 screws.

    • Move the cable out of the way for the second screw

    Modifier

  11. Razer Huntsman Tournament Edition Port Replacement: étape 10, image 1 de 1

    • Detach the internal cable from the USB board.

    • Do this carefully.

    Modifier

  12. Razer Huntsman Tournament Edition Port Replacement: étape 11, image 1 de 1

    • Remove the USB board.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Auteur

avec 2 autres contributeurs

Joseph O'Dowd

Membre depuis le 10/25/22

383 Réputation

3 tutoriels rédigés

Badges: 9

+ 6 badges supplémentaires

Équipe

UMass Dartmouth, Team 4-3, Sinclaire Fall 2022 Membre de l'équipe UMass Dartmouth, Team 4-3, Sinclaire Fall 2022

UMASSD-SINCLAIRE-F22S4G3

5 membres

7 tutoriels rédigés

Un commentaire

how do i get a new port and where

Guardian Suit - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 5

Total : 291