Réparez vos affaires Communauté Boutique

Razer Naga Trinity LK-E5 Optical Encoder Replacement

Introduction

If the mouse scroll wheel will not respond as it should, the scroll wheel encoder might need replacement. Reasons for the scroll wheel encoder to be repaired is because it is either out of date and needs a replacement or you need to reinstall Synapse 3. This guide will list all required steps to properly replace the LK-E5 Optical Encoder from the Razer Naga Trinity.

Ce dont vous avez besoin

  1. Razer Naga Trinity LK-E5 Optical Encoder Replacement, Razer Naga Trinity Disassembly: étape 1, image 1 de 2 Razer Naga Trinity LK-E5 Optical Encoder Replacement, Razer Naga Trinity Disassembly: étape 1, image 2 de 2

    • Remove the interchangeable side plate.

    Modifier

  2. Razer Naga Trinity LK-E5 Optical Encoder Replacement: étape 2, image 1 de 2 Razer Naga Trinity LK-E5 Optical Encoder Replacement: étape 2, image 2 de 2

    • Remove the mouse's feet using the opening pick.

    Modifier

    Be aware that it’s possible to peel the feet from the glue layer.

    SteepPoppy0 - Réponse

  3. Razer Naga Trinity LK-E5 Optical Encoder Replacement: étape 3, image 1 de 1

    • Remove the four 6mm screws by using a JIS #1 screwdriver.

    Modifier

  4. Razer Naga Trinity LK-E5 Optical Encoder Replacement: étape 4, image 1 de 2 Razer Naga Trinity LK-E5 Optical Encoder Replacement: étape 4, image 2 de 2

    • Separate the top mouse housing from the bottom mouse housing using the opening pick.

    • Be careful not to tug too hard on the ribbon connector.

    Modifier

  5. Razer Naga Trinity LK-E5 Optical Encoder Replacement: étape 5, image 1 de 1

    • Unlock the ribbon connector that is held down by the main board clips using the spudger's pointed end.

    Modifier

  7. Razer Naga Trinity LK-E5 Optical Encoder Replacement: étape 6, image 1 de 1

    • Remove the side housing using the opening pick.

    Modifier

  8. Razer Naga Trinity LK-E5 Optical Encoder Replacement: étape 7, image 1 de 2 Razer Naga Trinity LK-E5 Optical Encoder Replacement: étape 7, image 2 de 2

    • Remove the top housing LED 3-Pin connector that is near the main board.

    Modifier

  9. Razer Naga Trinity LK-E5 Optical Encoder Replacement, Scroll Wheel Housing: étape 8, image 1 de 2 Razer Naga Trinity LK-E5 Optical Encoder Replacement, Scroll Wheel Housing: étape 8, image 2 de 2

    • Remove one 4mm black Phillips #000 screw from the left side of the mouse holding the scroll wheel LED controller board.

    • Then pull the LED controller board upwards and out.

    Modifier

  10. Razer Naga Trinity LK-E5 Optical Encoder Replacement: étape 9, image 1 de 1

    • Pry and remove the scroll wheel feedback bar from its hold-down clips using the hook end of a halberd spudger.

    Modifier

  11. Razer Naga Trinity LK-E5 Optical Encoder Replacement: étape 10, image 1 de 1

    • Remove the scroll wheel feedback bar from the scroll wheel by holding down the spring and using angled tweezers to remove it from its placement.

    Modifier

  12. Razer Naga Trinity LK-E5 Optical Encoder Replacement: étape 11, image 1 de 2 Razer Naga Trinity LK-E5 Optical Encoder Replacement: étape 11, image 2 de 2

    • Remove the scroll wheel optical encoder 3-pin connector from the main board by wiggling the connector upwards.

    Modifier

  13. Razer Naga Trinity LK-E5 Optical Encoder Replacement: étape 12, image 1 de 3 Razer Naga Trinity LK-E5 Optical Encoder Replacement: étape 12, image 2 de 3 Razer Naga Trinity LK-E5 Optical Encoder Replacement: étape 12, image 3 de 3

    • Using the opening tool, pry the black bracket holding the scroll wheel in place backwards until the scroll wheel housing pops out.

    Modifier

    You don't have to remove that part, if you're careful you can leave the mouse wheel attatched to the mainboard because it's pretty fiddly to get the feather inside again.

    Andreas - Réponse

  14. Razer Naga Trinity LK-E5 Optical Encoder Replacement, LK-E5 Optical Encoder: étape 13, image 1 de 2 Razer Naga Trinity LK-E5 Optical Encoder Replacement, LK-E5 Optical Encoder: étape 13, image 2 de 2

    • Remove the scroll wheel from the scroll wheel housing using the opening tool.

    Modifier

  15. Razer Naga Trinity LK-E5 Optical Encoder Replacement: étape 14, image 1 de 2 Razer Naga Trinity LK-E5 Optical Encoder Replacement: étape 14, image 2 de 2

    • Remove the scroll wheel optical encoder from the scroll wheel.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Un commentaire

Where can we buy a replacement from?

Daniel - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 6

7 derniers jours : 17

30 derniers jours : 66

Total : 2,096