Aller au contenu principal

Introduction

The lock switch toggles whether or not the side grip switches on the Razer Ouroboros mouse are clickable or not. This guide will walk through how to replace these switches.

  1. Flip the mouse over and remove the stickers on the back of the device. These stickers are hiding the screws we need to remove. Locate and remove the captive screws to remove the hand rest.
    • Flip the mouse over and remove the stickers on the back of the device. These stickers are hiding the screws we need to remove.

    • Locate and remove the captive screws to remove the hand rest.

  2. Locate and remove the six 4mm screws on the back of the device. Slide the side panels off the back of the mouse.
    • Locate and remove the six 4mm screws on the back of the device.

    • Slide the side panels off the back of the mouse.

  3. Using your tweezers, grab the trigger switch that you want to replace, and lift it from its slot. If you have your replacement switch, place it in the newly freed slot and reassemble your device.
    • Using your tweezers, grab the trigger switch that you want to replace, and lift it from its slot.

    • If you have your replacement switch, place it in the newly freed slot and reassemble your device.

    • Note: the top guards of this mouse can come off now that the panel screws have been removed. Make sure these stay in place when reassembling.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Preston Darling

Membre depuis le 26/07/2016

372 Réputation

2 tutoriels rédigés

Équipe

University of Memphis, Team 1-2, Kim SU 2016 Membre de l'équipe University of Memphis, Team 1-2, Kim SU 2016

UM-KIM-SU16S1G2

3 membres

4 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 7

30 derniers jours : 24

Total : 2,706