Réparez vos affaires Communauté Boutique

Realigning 12-Inch Bionaire Fan Metal Coil

Introduction

Annoyed by the fact that your fan won't stay in a desired, fixed position? This fast fix guide will help correct that problem in no time!

Ce dont vous avez besoin

  1. Realigning 12-Inch Bionaire Fan Metal Coil, Realigning 12-Inch Bionaire Fan Metal Coil: étape 1, image 1 de 2 Realigning 12-Inch Bionaire Fan Metal Coil, Realigning 12-Inch Bionaire Fan Metal Coil: étape 1, image 2 de 2

    • Unlock all of the tabs holding the fan cage together.

    • Carefully pull off the cage.

    Modifier

  2. Realigning 12-Inch Bionaire Fan Metal Coil: étape 2, image 1 de 2 Realigning 12-Inch Bionaire Fan Metal Coil: étape 2, image 2 de 2

    • Using a Phillips #2 screwdriver, untighten the 1/4'' screw that is located underneath the fan blade.

    • Blade may be sharp so watch out!

    • Cautiously remove the blade from the hinge.

    • Put the screws in a cup so you don't lose them!

    Modifier

  3. Realigning 12-Inch Bionaire Fan Metal Coil: étape 3, image 1 de 2 Realigning 12-Inch Bionaire Fan Metal Coil: étape 3, image 2 de 2

    • Rotate the black cap counter-clockwise to disconnect it from the back fan cage.

    • Pull off the back cage from the engine holder.

    Modifier

  5. Realigning 12-Inch Bionaire Fan Metal Coil: étape 4, image 1 de 1

    • Working with the Phillips #2 screwdriver, loosen the 1/4'' center hinge screw from the metal base.

    Modifier

  6. Realigning 12-Inch Bionaire Fan Metal Coil: étape 5, image 1 de 2 Realigning 12-Inch Bionaire Fan Metal Coil: étape 5, image 2 de 2

    • Using the Phillips #2 screwdriver, separate the wire holder from the back of black cover by removing the two 1/8'' screws.

    Modifier

  7. Realigning 12-Inch Bionaire Fan Metal Coil: étape 6, image 1 de 2 Realigning 12-Inch Bionaire Fan Metal Coil: étape 6, image 2 de 2

    • Pull of the black knob by rotating the knob counter-clockwise.

    • Pull down the black cover all the way.

    • The coil may pop out after removing the cover.

    Modifier

  8. Realigning 12-Inch Bionaire Fan Metal Coil: étape 7, image 1 de 2 Realigning 12-Inch Bionaire Fan Metal Coil: étape 7, image 2 de 2

    • Take out the gold metal spring.

    • Realign the metal coil into designated space.

    • Push the coil in with some force so it rests perfectly in the space.

    • To make placing the coil back in more easier, use the screwdriver!

    Modifier

  9. Realigning 12-Inch Bionaire Fan Metal Coil: étape 8, image 1 de 2 Realigning 12-Inch Bionaire Fan Metal Coil: étape 8, image 2 de 2

    • Align the end of the metal coil into the same hole the black wire comes out of in the black cover from step 6.

    • This can be a frustrating step. Be patient!

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

3 autres ont terminé cette réparation.

Auteur

avec 2 autres contributeurs

Hemish Patel

Membre depuis le 09/29/15

231 Réputation

1 tutoriel rédigé

Badges: 5

+ 2 badges supplémentaires

Équipe

Cal Poly, Team 10-3, Green Fall 2015 Membre de l'équipe Cal Poly, Team 10-3, Green Fall 2015

CPSU-GREEN-F15S10G3

4 membres

4 tutoriels rédigés

Un commentaire

I have a fan It hum I have to spin the blade for it to start spin

Chris - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 8

30 derniers jours : 21

Total : 3,776