Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the strap by pulling it off of the mounts located on the body and neck.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the nine 12mm Phillips #1 screws around the perimeter of the case with a screwdriver.
-
Remove the two 15mm Phillips #1 screws connecting the body panel to the neck panel with a screwdriver.
-
Pull off the rear case.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the five 12mm Phillips #1 screws along the neck with a screwdriver.
-
Pull off the top shell of the neck to expose the internal features.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Use a screwdriver to remove the 10 mm Phillips #1 screws from the key sensor board.
-
Lift up on the key sensor board to remove it from the guitar neck.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Using your fingers, remove the rubber pad to expose the colored keys.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Reach one finger under the guitar to push the key out of the casing.
-
Repeat this step for the four remaining keys.
-
Annulation : je n'ai pas terminé ce tutoriel.
2 autres ont terminé cette réparation.