Réparez vos affaires Communauté Boutique

RedOctane X-Plorer Strum Bar Replacement

Introduction

The guitar strings often catch on the plastic case or wear over time. This guide demonstrates how to access the internal components of the strings and diagnose hidden problems.

Ce dont vous avez besoin

  1. RedOctane X-Plorer Strum Bar Replacement, Rear Case: étape 1, image 1 de 2 RedOctane X-Plorer Strum Bar Replacement, Rear Case: étape 1, image 2 de 2

    • Remove the strap by pulling it off of the mounts located on the body and neck.

    Traduire

  2. RedOctane X-Plorer Strum Bar Replacement: étape 2, image 1 de 3 RedOctane X-Plorer Strum Bar Replacement: étape 2, image 2 de 3 RedOctane X-Plorer Strum Bar Replacement: étape 2, image 3 de 3

    • Remove the nine 12mm Phillips #1 screws around the perimeter of the case with a screwdriver.

    • Remove the two 15mm Phillips #1 screws connecting the body panel to the neck panel with a screwdriver.

    • These screws can also be Torx on some models.

    • Pull off the rear case.

    Traduire

  4. RedOctane X-Plorer Strum Bar Replacement: étape 3, image 1 de 3 RedOctane X-Plorer Strum Bar Replacement: étape 3, image 2 de 3 RedOctane X-Plorer Strum Bar Replacement: étape 3, image 3 de 3

    • Remove the five 12mm Phillips #1 screws along the neck with a screwdriver.

    • Pull off the top shell of the neck to expose the internal features.

    Traduire

  5. RedOctane X-Plorer Strum Bar Replacement, Strum Bar: étape 4, image 1 de 1

    • Using two hands, gently remove the two string rod fixtures.

    Traduire

  6. RedOctane X-Plorer Strum Bar Replacement: étape 5, image 1 de 1

    • Lift up on the strum bar to remove it from the guitar.

    Traduire

  7. RedOctane X-Plorer Strum Bar Replacement: étape 6, image 1 de 2 RedOctane X-Plorer Strum Bar Replacement: étape 6, image 2 de 2

    • Remove the string rod by gently pulling it out of the strum bar.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

4 autres ont terminé cette réparation.

Auteur

avec 2 autres contributeurs

Jared McMullen

Membre depuis le 04/18/18

276 Réputation

1 tutoriel rédigé

Badges: 8

+ 5 badges supplémentaires

Équipe

Cal Poly, Team S17-G1, Livingston Spring 2018 Membre de l'équipe Cal Poly, Team S17-G1, Livingston Spring 2018

CPSU-LIVINGSTON-S18S17G1

3 membres

9 tutoriels rédigés

2 commentaires

This did not help.

michelle Coronel - Réponse

I had a squeaking strum bar so I followed this guide to dismantle and clean the parts. Other than the one step missed in the guide it was easy to follow. It also stopped the squeaking!

Zachary Avery - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 5

30 derniers jours : 41

Total : 3,552