Introduction

This guide will systematically explain how to replace the shaving blade of the Remington MB4040. A rough or irritating shave is most likely caused by a dull blade. The replacement of this dull blade will allow for a more comfortable shave.

Pièces

Aucune pièce nécessaire.

Press the black button to release the blade from its locked position.
  • Press the black button to release the blade from its locked position.

Ajouter un commentaire

Remove the two 8.0 mm PH00 Phillips head screws from the blade assembly.
  • Remove the two 8.0 mm PH00 Phillips head screws from the blade assembly.

  • Detach the silver blade from the blade assembly and replace with the new blade.

The entre assemble comes apart once you remove the blade. I cannot figure out how to get it back together and in the housing. Any suggestions?

sublime - Réponse

I have the same problem, I cannot figure out how the spring is attached/held to the blade.

Peter J. Ford - Réponse

Conclusion

To reassemble your device, follow these instructions in reverse order.

Cameron Carnahan

Membre depuis le 20/01/2015

697 Réputation

6 tutoriels rédigés

Équipe

USF Tampa, Team 1-5, Blackwell Winter 2015 Membre de l'équipe USF Tampa, Team 1-5, Blackwell Winter 2015

USFT-BLACKWELL-W15S1G5

3 membres

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 3

7 derniers jours : 26

30 derniers jours : 147

Total : 4,521