Réparez vos affaires Communauté Boutique

Remington S5500 Power Supply Cable Removal

Introduction

Two tools required for the completion of this task include a PH1 screwdriver, and a prying tool.

All screws on this device are 10mm (0.393 in).

Ce dont vous avez besoin

  1. Remington S5500 Power Supply Cable Removal, Power Supply Cable: étape 1, image 1 de 2 Remington S5500 Power Supply Cable Removal, Power Supply Cable: étape 1, image 2 de 2

    • Place the prying tool in between the hair straightener and the aligning cap.

    • Push forwards on the prying tool to pop off the aligning cap.

    Modifier

  2. Remington S5500 Power Supply Cable Removal: étape 2, image 1 de 3 Remington S5500 Power Supply Cable Removal: étape 2, image 2 de 3 Remington S5500 Power Supply Cable Removal: étape 2, image 3 de 3

    • Remove the screws with the Phillips #1 screwdriver located underneath the aligning cap, one on each side of the straightener.

    • Use the prying tool to remove the aligning rods after the removal of the screws.

    • Gently separate each half of the hair straightener.

    • The spring located in the middle of this mechanism may pop out and can get lost very easily. Try to separate the two components slowly.

    Modifier

  4. Remington S5500 Power Supply Cable Removal: étape 3, image 1 de 2 Remington S5500 Power Supply Cable Removal: étape 3, image 2 de 2

    • After the hair straightener is separated, use a Phillips #1 screwdriver to remove the two screws located on the lower half of the straightener.

    • Use the prying tool to remove the hinge cover.

    Modifier

  5. Remington S5500 Power Supply Cable Removal: étape 4, image 1 de 2 Remington S5500 Power Supply Cable Removal: étape 4, image 2 de 2

    • Pull upwards while pulling outwards to disconnect the wire from the housing.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autres ont terminé cette réparation.

Auteur

avec 1 autre contributeur

Benjamin Yohe

Membre depuis le 07/11/18

303 Réputation

2 tutoriels rédigés

Badges: 8

+ 5 badges supplémentaires

Équipe

IUPUI, Team S3-G3, Wilson Summer 2018 Membre de l'équipe IUPUI, Team S3-G3, Wilson Summer 2018

IUPUI-WILSON-SU18S3G3

5 membres

2 tutoriels rédigés

6 commentaires

Excelente trabajo! Muchas gracias por la información!

Ronnetto - Réponse

is there a place where you can buy and replace the power cable, or the plug ?

alexandru popa - Réponse

the slip ring plug that is ..

alexandru popa -

Hello,

from where did you get the spare power cord ?

Kes - Réponse

part number would be helpful?

Steven Lamprell - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 3

7 derniers jours : 10

30 derniers jours : 85

Total : 6,623