Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Pièces & Outils

Introduction

Remove the main fan from the case.

  1. Pull on outer latch. Lower door until it is level with your work surface.
    • Pull on outer latch.

    • Lower door until it is level with your work surface.

    • Before working on the computer make sure it is not plugged into a power supply, then touch a metal object. This discharges static electricity, which could damage the computer.

  2. Manta Precision Bit Set

    112 embouts pour toute réparation.

    Upgrade Your Toolbox

    Manta Precision Bit Set

    Upgrade Your Toolbox
  3. Remove the screw from each of the two niches on lower part of fan using the Phillips #1 screwdriver. The fan housing will still be connected to the computer by a power cable which will be removed in the next step.
    • Remove the screw from each of the two niches on lower part of fan using the Phillips #1 screwdriver.

    • The fan housing will still be connected to the computer by a power cable which will be removed in the next step.

  4. Remove the power cable from the fan and detach bracing.
    • Remove the power cable from the fan and detach bracing.

Ligne d'arrivée

2 autre(s) ont terminé cette réparation.

Justin Petrilli

Membre depuis le 21/01/2010

2 811 Réputation

11 tutoriels rédigés

Équipe

Cal Poly, Team 13-24, Maness Winter 2010 Membre de l'équipe Cal Poly, Team 13-24, Maness Winter 2010

CPSU-MANESS-W10S13G24

4 membres

20 tutoriels rédigés

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 3

7 derniers jours : 3

30 derniers jours : 6

Total : 4,964