Réparez vos affaires

Droit à la réparation

Boutique

Removing Back Cover

Rédigé par : Hasit (et 11 autres contributeurs)
  • Commentaires : 0
  • Favoris : 0
  • Réparations terminées : 2

Difficulté

Facile

Étapes

5

Temps nécessaire

10 minutes

Sections

1

Drapeaux

1

Mismatched Prerequisites

Conditions préalables incohérentes

Il n'y a pas de tutoriels prérequis pour ce tutoriel. Aidez-le à trouver un partenaire en le dénichant ou en l'écrivant !

Introduction

This guide will show how to remove the back cover.

  1. Remove the six external screws from the camera using a Phillips #0 screwdriver. After the screws has been removed, the bottom of the back half of the external case should be loosened from the camera. Be careful, make sure you don't lose the screws.

    • Remove the six external screws from the camera using a Phillips #0 screwdriver.

    • After the screws has been removed, the bottom of the back half of the external case should be loosened from the camera.

    • Be careful, make sure you don't lose the screws.

    Modifier

  2. Open the battery cover that's located on the bottom right side of the camera and carefully remove the battery. Open the battery cover that's located on the bottom right side of the camera and carefully remove the battery.

    • Open the battery cover that's located on the bottom right side of the camera and carefully remove the battery.

    Modifier

  4. Slide your fingernail or a plastic spudger in the groove from the bottom to the top right side of the camera. Slide your fingernail or a plastic spudger in the groove from the bottom to the top right side of the camera. Slide your fingernail or a plastic spudger in the groove from the bottom to the top right side of the camera.

    • Slide your fingernail or a plastic spudger in the groove from the bottom to the top right side of the camera.

    Modifier

  5. Carefully squeeze the top right corner of the camera and pry off the external cover.

    • Carefully squeeze the top right corner of the camera and pry off the external cover.

    • If you hear a "cracking" sound. This is normal.

    • Continue to pull the external cover and it will come off cleanly.

    • Be cautious of the flash capacitor. It carries an electrical charge, that may give you an unpleasant shock.

    Modifier

  6. Carefully pull off the back cover, parts behind the back of the case might fall out.

    • Carefully pull off the back cover, parts behind the back of the case might fall out.

    Modifier
Ligne d'arrivée

2 autre(s) ont terminé cette réparation.

Auteur

avec 11 autres contributeurs

Hasit

Membre depuis le 15/04/2010

183 Réputation

2 tutoriels rédigés

Badges: 10

+ 7 badges supplémentaires

Équipe

Cal Poly, Team 6-17, Maness Spring 2010 Membre de l'équipe Cal Poly, Team 6-17, Maness Spring 2010

CPSU-MANESS-S10S6G17

4 membres

10 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 3

Total : 3,422