Aller au contenu principal

Introduction

This guide will demonstrate removing the computer's processor.

Pièces

Aucune pièce spécifiée.

  1. Place the case on its side.
    • Place the case on its side.

    • Locate and remove the two 13.1 mm thumbscrews.

  2. Slide the side panel towards the back and remove.
    • Slide the side panel towards the back and remove.

  3. Locate the processor's heat sink and fan.
    • Locate the processor's heat sink and fan.

  4. Fix Kits pour Android

    Remplacer l'écran ou la batterie est à portée de kit !

    Acheter maintenant

    Fix Kits pour Android

    Remplacer l'écran ou la batterie est à portée de kit !

    Acheter maintenant
  5. Remove the fan's power cable from the motherboard.
    • Remove the fan's power cable from the motherboard.

  6. Locate and unscrew the four Phillips #0 screws at the corners of the fan.
    • Locate and unscrew the four Phillips #0 screws at the corners of the fan.

    • The screws will not come out completely.

  7. Remove the fan and heat sink.
    • Remove the fan and heat sink.

  8. Gently press down and release the silver lever.
    • Gently press down and release the silver lever.

  9. Open the metal casing over the processor.
    • Open the metal casing over the processor.

  10. Gently lift up the processor, holding by the edges only.
    • Gently lift up the processor, holding by the edges only.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Note: For reassembly on step seven, make sure the corner of the processor with the gold triangle is pointing towards the release lever.

10 autre(s) ont terminé cette réparation.

James Aldag

Membre depuis le 20/10/2011

345 Réputation

3 tutoriels rédigés

Équipe

Cal Poly, Team 6-8, Regan Fall 2011 Membre de l'équipe Cal Poly, Team 6-8, Regan Fall 2011

CPSU-REGAN-F11S6G8

4 membres

18 tutoriels rédigés

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 1

7 derniers jours : 3

30 derniers jours : 11

Total : 7,226