Introduction

Removing front panel to replace main LCD or small display screen.

Pièces

Aucune pièce nécessaire.

  1. Using the plastic opening tool, pry off the top faceplate.
    • Using the plastic opening tool, pry off the top faceplate.

    • Place the tool in the small crack that runs along the side of the phone and pry.

  2. Using the T6 Torx Screwdriver remove all 4 small screws.
    • Using the T6 Torx Screwdriver remove all 4 small screws.

  3. %Livraison gratuite pour toute commande supérieure à 100 $US ou contenant un Pro Tech Toolkit !

    Parcourez notre boutique
  4. Remove silver plate from phone.
    • Remove silver plate from phone.

  5. Using the spudger remove the plastic camera casing
    • Using the spudger remove the plastic camera casing

  6. Using the iPod Opening Tool remove the yellow flex cable from the green logic board.
    • Using the iPod Opening Tool remove the yellow flex cable from the green logic board.

  7. Use Spudger or hands to detach flex cable from front screen logic board
    • Use Spudger or hands to detach flex cable from front screen logic board

Conclusion

To reassemble your device, follow these instructions in reverse order.

Cecilia

Membre depuis le 11/04/2010

1 Réputation

3 tutoriels rédigés

Équipe

Cal Poly, Team 27-96, Amido Spring 2010 Membre de l'équipe Cal Poly, Team 27-96, Amido Spring 2010

CPSU-AMIDO-S10S27G96

4 membres

15 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 1,803