Introduction

This guide will show you how to remove a PCI card on your HP Compaq dx2000MT.

  1. Turn off your computer and remove the power cable by pulling it straight out of its socket.
    • Turn off your computer and remove the power cable by pulling it straight out of its socket.

  2. Remove the 2 Phillips #2 screws that secure the case door to the device. Remove the 2 Phillips #2 screws that secure the case door to the device.
    • Remove the 2 Phillips #2 screws that secure the case door to the device.

  3. %Livraison gratuite pour toute commande supérieure à 100 $US ou contenant un Pro Tech Toolkit !

    Parcourez notre boutique
  4. Remove the side case door by pushing towards the rear of the device with your hand. This may take considerable force so keep pushing! Once you slide the door back, remove it by pulling it outwards from the device.
    • Remove the side case door by pushing towards the rear of the device with your hand.

    • This may take considerable force so keep pushing!

    • Once you slide the door back, remove it by pulling it outwards from the device.

  5. Remove the side case door by pushing towards the rear of the device with your hand. Once again, this may take considerable force. Once you slide the door back, remove it by pulling it outwards from the device.
    • Remove the side case door by pushing towards the rear of the device with your hand.

    • Once again, this may take considerable force.

    • Once you slide the door back, remove it by pulling it outwards from the device.

  6. Remove the Torx T15 screwdriver holding the PCI card in place. Remove the Torx T15 screwdriver holding the PCI card in place.
    • Remove the Torx T15 screwdriver holding the PCI card in place.

  7. Remove the PCI card by pulling it out towards the side of the device.
    • Remove the PCI card by pulling it out towards the side of the device.

    • Be careful about touching the top and bottom of the card! The static electricity in your fingers could short it. If you can, only touch the metal bracket and the sides of the card.

Conclusion

To reassemble your device, follow these instructions in reverse order.

6 autre(s) ont terminé cette réparation.

Logan Pace

Membre depuis le 12/10/2011

2 020 Réputation

9 tutoriels rédigés

Équipe

Cal Poly, Team 17-16, Regan Fall 2011 Membre de l'équipe Cal Poly, Team 17-16, Regan Fall 2011

CPSU-REGAN-F11S17G16

4 membres

17 tutoriels rédigés

Voir les statistiques:

Dernières 24 heures : 2

7 derniers jours : 10

30 derniers jours : 39

Total : 4,392