Ce tutoriel a des changements plus récents. Passer à la dernière version non vérifiée.
Introduction
This guide will show you how to remove the power supply on your HP Compaq dx2000MT.
Ce dont vous avez besoin
-
-
Turn off your computer and remove the power cable by pulling it straight out of its socket.
-
-
-
-
Remove the 4 pin ATX power connector from the motherboard by pressing down the holding latch and pulling out towards the side of the device.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
8 autres ont terminé cette réparation.