Introduction

Only requires removing a few screws. No special tools required.

Pièces

Aucune pièce nécessaire.

  1. Flip the camera so that the bottom is facing you.
    • Flip the camera so that the bottom is facing you.

    • Take a spare coin and unscrew the battery cover off.

    Ajouter un commentaire

  2. Remove the batteries, making sure to note their proper alignment.
    • Remove the batteries, making sure to note their proper alignment.

    Ajouter un commentaire

    • Remove two 4.8mm screws.

    • Remove one 3.4mm screw.

    • Remove one 2.65mm screw.

    • Lift off the back cover.

    Ajouter un commentaire

    • Remove three 3.5mm screws.

    • Remove two 3.8mm screws.

    • Remove one 6.35mm screw.

    • Remove one 4mm screw. Lift off the disk.

    • Remove one 5.11mm screw.

    Ajouter un commentaire

    • Lift up the silver, metal piece

    • Please note that some internal pieces may come loose during this process.

    Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autre(s) ont terminé cette réparation.

Nick

Membre depuis le 19/04/2011

411 Réputation

4 tutoriels rédigés

Équipe

Cal Poly, Team 8-7, Regan Spring 2011 Membre de l'équipe Cal Poly, Team 8-7, Regan Spring 2011

CPSU-REGAN-S11S8G7

4 membres

4 tutoriels rédigés

good advice, will use, have multiple Minolta cameras to work with.

gabriel johnson - Réponse

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 2

7 derniers jours : 5

30 derniers jours : 46

Total : 8,057