Aller au contenu principal

Removing Nikon Coolpix 4600 Front and Rear case

Ce dont vous avez besoin

  1. Removing Nikon Coolpix 4600 Front and Rear case, Front and Rear Case: étape 1, image 1 de 2 Removing Nikon Coolpix 4600 Front and Rear case, Front and Rear Case: étape 1, image 2 de 2
    • Locate the six screws on the outside of the camera (2 3.3 mm on the bottom, 2 5.25 mm on the left, and 2 5.25 mm on the right).

    • Using a Phillips 00 screwdriver, remove all of the six screws.

  2. Removing Nikon Coolpix 4600 Front and Rear case: étape 2, image 1 de 2 Removing Nikon Coolpix 4600 Front and Rear case: étape 2, image 2 de 2
    • Carefully pull the front and back case apart.

    • The front case is attached to internal components and cannot be removed independently.

  3. Removing Nikon Coolpix 4600 Front and Rear case: étape 3, image 1 de 1
    • Look closely at the connection between the ribbon cable and the motherboard. Locate the two grey tabs on either side of the connecting bracket.

    • Slide the grey tabs toward the bottom of camera. Gently disconnect the ribbon cable from the motherboard.

    • After disconnecting the data ribbon, you can now separate the back case from the front case.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Nathan Sperling

Membre depuis le 05/08/12

119 Réputation

4 tutoriels rédigés

Équipe

Cal Poly, Team 9-43, Regan Spring 2012 Membre de l'équipe Cal Poly, Team 9-43, Regan Spring 2012

CPSU-REGAN-S12S9G43

5 membres

12 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 4

Total : 1,475