Removing Philips DC320 37 Bottom Panel

Introduction

Welcome to the DC320 Repair Guide, your comprehensive resource for restoring power and performance to your electronic device. Whether you're a seasoned technician or a DIY enthusiast, this guide will walk you through the steps to address common issues and revitalize your DC320.

Ce dont vous avez besoin

Étape 1 Docking entertainment system

Removing Philips DC320 37 Bottom Panel, Docking entertainment system: étape 1, image 1 de 1

Pry off the four white feet with the pointed end of the spudger

Traduire

Étape 2

Gently unscrew the four 15.5 mm Phillips #2 screws that hold the bottom panel to the dock.

Traduire

Étape 3

Use the flat end of the spudger to pry the lid off from the two connectors holding it to the body of the dock.
The connectors on the panel are fragile and may break.

Traduire

Étape 4

Removing Philips DC320 37 Bottom Panel: étape 4, image 3 de 3

Carefully pull up and out the four electrical connectors and two ribbon connectors that connect the bottom panel to the dock.
Electrical Connectors
Ribbon Connectors
The cables do not have a lot of slack in them. Be careful not to break the connectors.
One wire is soldered onto the bottom panel. Be careful not to break this bond.