Pièces

Aucune pièce nécessaire.

Open the tray by pressing the eject button
  • Open the tray by pressing the eject button

  • Remove the DVD tray faceplate by pushing the faceplate up off of the tray.

Ajouter un commentaire

Press the eject button to insert the tray
  • Press the eject button to insert the tray

  • After the tray is closed unplug DVD player

Ajouter un commentaire

  • Unscrew the 3 screws in the back.

Ajouter un commentaire

  • Pull the outer case upward and then towards you.

Ajouter un commentaire

  • There are six symmetrically placed tabs holding in the front faceplate. Unhook these six tabs to loosen the faceplate.

Ajouter un commentaire

  • Pull off front faceplate. This may take a couple of tries to get all six tabs unhooked simultaneously.

Ajouter un commentaire

  • Locate the white clip that attaches the cord to the motherboard

  • Grasp clip and squeeze to release

  • Lift up and remove power cord

  • Slide cord mount from outer case

Ajouter un commentaire

  • Remove the three screws holding in the DVD tray

Ajouter un commentaire

  • Remove the power cord and first two ribbons by pulling them directly out of their sockets.

Ajouter un commentaire

  • Gently lift the DVD tray off of the motherboard.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Evan Domingue

Membre depuis le 28/01/2011

398 Réputation

3 tutoriels rédigés

Équipe

Cal Poly, Team 3-30, Regan Winter 2011 Membre de l'équipe Cal Poly, Team 3-30, Regan Winter 2011

CPSU-REGAN-W11S3G30

4 membres

8 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 3

Total : 1,580