Introduction
In this guide you will be removing the side case doors. This is a necessary step to replace every other component on the HP Compaq dx2000MT.
Ce dont vous avez besoin
-
-
Turn off your computer and remove the power cable by pulling it straight out of its socket.
-
-
-
-
Remove the side case door by pushing towards the rear of the device with your hand.
-
Once you slide the door back, remove it by pulling it outwards from the device.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
5 autres ont terminé cette réparation.