Introduction

Provides detail on removing the modem card from the laptop

Pièces

Aucune pièce nécessaire.

  1. Flip laptop over and locate the battery release button Push release button to the left to release battery and gently pull battery from the laptop Push release button to the left to release battery and gently pull battery from the laptop
    • Flip laptop over and locate the battery release button

    • Push release button to the left to release battery and gently pull battery from the laptop

  2. Loosen the three Phillips 2.5×9.0 captive screws that secure the keyboard to the laptop Turn the laptop so the keyboard is facing up and locate the 4 retention tabs along the back edge of the keyboard Slide the retention clips toward the keyboard to release the keyboard
    • Loosen the three Phillips 2.5×9.0 captive screws that secure the keyboard to the laptop

    • Turn the laptop so the keyboard is facing up and locate the 4 retention tabs along the back edge of the keyboard

    • Slide the retention clips toward the keyboard to release the keyboard

  3. %Livraison gratuite pour toute commande supérieure à 100,00 $US ou contenant un Pro Tech Toolkit !

    Parcourez notre boutique

    Vous avez déjà réparé quelque chose ? Vous êtes un génie.

    Partagez votre réparation avec le hashtag #ImAGenius

    Nous sommes tous des génies

    Partagez votre réparation avec le hashtag #ImAGenius

  4. Use a plastic pry tool to lift the rear edge of the keyboard. Pull  the keyboard slightly towards the display to disengage  the tabs along the front of the keyboard from the laptop palm rest. Lift the keyboard up to reveal the ribbon connectors
    • Use a plastic pry tool to lift the rear edge of the keyboard.

    • Pull the keyboard slightly towards the display to disengage the tabs along the front of the keyboard from the laptop palm rest.

    • Lift the keyboard up to reveal the ribbon connectors

  5. Release the larger ribbon cable by flipping the brown retainer up so it is parallel with the ribbon cable Release the smaller ribbon cable by lifting up the white retainer I found it easier to reinstall both cables with the new keyboard resting on the back edge
    • Release the larger ribbon cable by flipping the brown retainer up so it is parallel with the ribbon cable

    • Release the smaller ribbon cable by lifting up the white retainer

    • I found it easier to reinstall both cables with the new keyboard resting on the back edge

  6. Locate the modem card and remove the 2 M2.5×4.0 screws The modem card is it is plugged into a connector on the logic board.  Gently lift the card up and out of the laptop
    • Locate the modem card and remove the 2 M2.5×4.0 screws

    • The modem card is it is plugged into a connector on the logic board. Gently lift the card up and out of the laptop

    • A plastic spudger may be useful in lifting the card out

    • Be careful as there is a small cable connected to the edge of the modem card closest to the LCD display

    • Disconnect the cable from the modem card to complete removal

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Richdave

Membre depuis le 09/04/2010

28 967 Réputation

30 tutoriels rédigés

Équipe

Master Techs Membre de l'équipe Master Techs

Community

280 membres

784 tutoriels rédigés

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 3

30 derniers jours : 7

Total : 1,086