Réparez vos affaires Communauté Boutique

Removing the Jura IMPRESSA J5 brewing unit (brewgroup)

Introduction

These instructions tell you how to extract the brewing unit.

Ce dont vous avez besoin

  1. Removing the Jura IMPRESSA J5 brewing unit (brewgroup), Jura Capresso IMPRESSA J5 opening procedure: étape 1, image 1 de 1

    • Unplug the power cord!

    • Remove the water tank and the drip tray. Remove all coffee beans from the storage container.

    Traduire

  2. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): étape 2, image 1 de 3 Removing the Jura IMPRESSA J5 brewing unit (brewgroup): étape 2, image 2 de 3 Removing the Jura IMPRESSA J5 brewing unit (brewgroup): étape 2, image 3 de 3

    • Flip open the lid of the bean compartment.

    • Unscrew the two slotted screws inside the bean compartment. The screws have a rubber washer and will not come out completely.

    • Remove the bean compartment.

    Traduire

  3. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): étape 3, image 1 de 3 Removing the Jura IMPRESSA J5 brewing unit (brewgroup): étape 3, image 2 de 3 Removing the Jura IMPRESSA J5 brewing unit (brewgroup): étape 3, image 3 de 3
    Outil utilisé dans cette étape :
    iFixit Precision 4 mm Screwdriver Bit
    $2.99
    J'achète

    • The top cover is fastened with oval head screws. Unscrew them.

    • These screws have an oval head that makes them look like rivets (picture 2). You need to use a special bit - also available at iFixit - for their removal. Here a DIY guide. If the right bit is not available, it could be done with a pair of needle nose pliers. Jura wants to keep us out of our own machines!!!

    Traduire

  4. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): étape 4, image 1 de 1

    • Also remove the two oval head screws underneath the ground coffee compartment lid.

    Traduire

  5. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): étape 5, image 1 de 1

    • Now you can pry up the top cover all around.

    • Remove the top cover. This often requires a little force.

    • Use plastic tools to avoid scratching your device.

    Traduire

  7. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): étape 6, image 1 de 2 Removing the Jura IMPRESSA J5 brewing unit (brewgroup): étape 6, image 2 de 2

    • Turn the device with the back facing you.

    • Turn the Jura label a few degrees counterclockwise. If it's hard to do, use a small suction cup.

    • Remove the Jura label.

    Traduire

  8. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): étape 7, image 1 de 3 Removing the Jura IMPRESSA J5 brewing unit (brewgroup): étape 7, image 2 de 3 Removing the Jura IMPRESSA J5 brewing unit (brewgroup): étape 7, image 3 de 3

    • Underneath the label you will find two Torx T15 screws. Remove them.

    • Carefully pull the top of the chrome cover slightly outwards, then push it down and put it aside.

    Traduire

  9. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): étape 8, image 1 de 1

    • Remove the Torx T15 screw on the side panel with the water tank.

    Traduire

  10. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): étape 9, image 1 de 2 Removing the Jura IMPRESSA J5 brewing unit (brewgroup): étape 9, image 2 de 2

    • Pull the right side panel slightly towards the back.

    • Remove the side panel.

    Traduire

  11. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): étape 10, image 1 de 1

    • Pull the left side panel slightly towards the back and remove it.

    Traduire

  12. Removing the Jura IMPRESSA J5 brewing unit (brewgroup), Removing the Jura IMPRESSA J5 brewing unit (brewgroup): étape 11, image 1 de 2 Removing the Jura IMPRESSA J5 brewing unit (brewgroup), Removing the Jura IMPRESSA J5 brewing unit (brewgroup): étape 11, image 2 de 2

    • The brewing unit is on the left side of the machine.

    Traduire

  13. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): étape 12, image 1 de 2 Removing the Jura IMPRESSA J5 brewing unit (brewgroup): étape 12, image 2 de 2

    • The cover over the brewing unit is only lightly gripped. Lift it out.

    Traduire

  14. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): étape 13, image 1 de 1

    • In this image the brewing unit has been removed already to show you how it is connected.

    • Two Torx T15 machine screws

    • One Torx T15 screw

    • The hot water connection is plugged in.

    • The hose for the coffee spout is connected above.

    Traduire

  15. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): étape 14, image 1 de 1

    • Unscrew the two Torx T15 machine screws.

    • Unscrew the lower Torx T15 screw near the hot water inlet pipe.

    • Pull off the coffee dispensing pipe.

    Traduire

  16. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): étape 15, image 1 de 1

    • First pull the brewing unit outward slightly at the base, lift it out with a downward motion.

    • If you want to disassemble the brewing unit for maintenance or cleaning, use these oder these instructions.

    Traduire
Conclusion

Work your way through the instructions in reverse to re-assemble the device.

Une autre personne a terminé cette réparation.

Merci à ces traducteurs :

de en

100%

jana°

VauWeh

Ces traducteurs nous aident réparer le monde ! Vous voulez contribuer ?
Commencez à traduire ›

Auteur

avec 1 autre contributeur

VauWeh

Membre depuis le 10/19/15

202 869 Réputation

246 tutoriels rédigés

Badges: 44

+ 41 badges supplémentaires

Équipe

Repair is War on Entropy Membre de l'équipe Repair is War on Entropy

Community

25 membres

1 110 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 2

7 derniers jours : 12

30 derniers jours : 67

Total : 4,671