Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Introduction
La caméra arrière peut causer des problèmes lorsque le câble plat n'est pas branché correctement ou que la caméra est endommagée. Ce guide devrait vous aider à résoudre ces deux problèmes.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Lift the battery out of its recess and remove it.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the eight Phillips #00 screws (4 mm length).
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Insert an opening pick between the bottom right corner of the motherboard cover and the motherboard.
-
Pry up the motherboard cover to open the plastic clips which hold the cover in its place.
-
Work your way along the right edge.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Carefully lift the right edge of the motherboard cover.
-
Remove the motherboard assembly.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Use a spudger to pry up and disconnect the display flex cable.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Use a spudger to pry up and disconnect the digitizer flex cable.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Use a spudger to pry up and disconnect the rear camera flex cable.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Use a spudger to pry up and disconnect the front camera flex cable.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Slide an opening pick under the bottom right corner of the motherboard and slowly pry it out of its recess by rotating the opening pick sideways.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Slide the opening pick under the right edge of the motherboard where the SIM card slot is located and pry it up by rotating the opening pick sideways.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Grab the top section of the motherboard and carefully lift it out of the phone.
-
-
-
Prenez un outil d'ouverture en plastique et enlevez la caméra arrière sur les côtés et en soulevant.
-
Pour réassembler votre appareil, suivez ces instructions dans l'ordre inverse.
Pour réassembler votre appareil, suivez ces instructions dans l'ordre inverse.
Annulation : je n'ai pas terminé ce tutoriel.
26 autres ont terminé cette réparation.
Merci à ces traducteurs :
100%
Ces traducteurs nous aident réparer le monde ! Vous voulez contribuer ?
Commencez à traduire ›
7 commentaires
perfect. Camera had stopped functioning on my G3 (due to some clumsiness on my part). Followed the steps and disconnect camera ribbon, then reconnected and reassembled. Now all functioning perfectly.
how was it not functioning? Mine suddenly wont even detect that there is a back camera and I am debating whether to try this and risk ruining the phone or just spending the extra cash and having it done professionally since I can't get a new one until april.
Mine the camera started crashing 'unfortunately camera stopped' but the selfie cam worked. Reset did nothing have to try this.
Will the phone work with out the camera in it?
Excellent guide. Bad auto focus, replaced -> works !
Would add in step 6, top panel is held on by small plastic tabs on the edges.
As with all electronic dis/assembly, make sure take appropriate anti-static precautions.