Introduction

The actuator failure occurs due to faulty design. Apparently replacement actuators are no better than the originals as they continue to fail. I did this to my Odyssey several years ago after both rear window actuators failed within months of each other. I have not had a single failure since applying this fix.

    • Download attached PDF.

Conclusion

To reassemble your device, follow these instructions in reverse order.

16 autre(s) ont terminé cette réparation.

Pièces jointes

Marvin

Membre depuis le 27/06/2010

477 Réputation

1 tutoriel rédigé

18 commentaires

Down load didn't work...I would really like to have the answer to this question. PDF does not provide any information...if there are links inside the PDF they don't work either. The key question is how do you remove the panel that covers the Honda Odyssey Rear window actuator?....on a 2002 to be specific?

KHM - Réponse

Worked great!! I only broke 1 clip getting the panels off. That meant I paid the dealer about $1.50 instead of the $300 they wanted to fix it.

Grunt - Réponse

This mod is done to new/working actuators, correct? Not ones that have already failed.

gradh - Réponse

The mod can be done to failed or non-failed actuators. The part that fails is bypassed. It was primarily developed to repair failed actuators.

Marvin - Réponse

Voir les statistiques:

Dernières 24 heures : 1

7 derniers jours : 27

30 derniers jours : 118

Total : 55,420