Aller au contenu principal

Introduction

Component teardown of Gateway 420GR desktop. This machine originally shipped with Windows XP.

Cette vue éclatée n'est pas un tutoriel de réparation. Pour réparer votre Gateway 420GR, utilisez notre manuel de réparation.

  1. The left panel of the case has thumbscrews that release the left side from the case.
    • The left panel of the case has thumbscrews that release the left side from the case.

  2. Loosen the first thumbscrew
    • Loosen the first thumbscrew

  3. Fix Kits pour batterie de MacBook

    À partir de $69.99

    Buy Now

    Fix Kits pour batterie de MacBook

    À partir de $69.99

    Buy Now
  4. Loosen the second thumbscrew.
    • Loosen the second thumbscrew.

  5. The side panel will now slide toward the back of the case.
    • The side panel will now slide toward the back of the case.

  6. System RAM
    • System RAM

    • USB headers for front panel USB ports.

    • CMOS battery

  7. Pair one RAM retention clips.  There are two (one on each end) for each of the available slots.
    • Pair one RAM retention clips. There are two (one on each end) for each of the available slots.

    • Pair two RAM retention clips. There are two (one on each end) for each of the available slots.

    • RAM should be paired (same size) and the machine support up to 4GB or RAM as 1GB modules in each of the 4 slots.

    • System supported RAM is 184-pin DIMM DDR PC3200

kyle23

Membre depuis le 22/04/2010

182 Réputation

1 tutoriel rédigé

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 10

Total : 2,537