Introduction

This is how to repair the lever on your Oster Toaster

Pièces

Aucune pièce nécessaire.

  1. Assure the toaster is unplugged. Assure the toaster is unplugged. Assure the toaster is unplugged.
    • Assure the toaster is unplugged.

  2. Look down into the bread slots and assure that the metal tongues are not bent or crooked. Look down into the bread slots and assure that the metal tongues are not bent or crooked.
    • Look down into the bread slots and assure that the metal tongues are not bent or crooked.

  3. %Livraison gratuite pour toute commande supérieure à 100,00 $US ou contenant un Pro Tech Toolkit !

    Parcourez notre boutique
    • If the metal tongues are bent use the pliers to straighten them.

    • Plug your toaster back in and test it to see if the lever stays down.

  4. (Optional): To clean the toaster, make sure it is unplugged, empty the crumb tray and then clean out all visible residue.
    • (Optional): To clean the toaster, make sure it is unplugged, empty the crumb tray and then clean out all visible residue.

      • Note: Compressed air, wooden skewers, and slightly damp, lint free cloths are most helpful when cleaning your toaster.

      • Be sure that the toaster is completely dry from cleaning before you reassemble it.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Daniel

Membre depuis le 13/07/2013

109 Réputation

1 tutoriel rédigé

Équipe

UC Santa Barbara, Team 2-6, Bradley Spring 2013 Membre de l'équipe UC Santa Barbara, Team 2-6, Bradley Spring 2013

UCSB-BRADLEY-S13S2G6

3 membres

1 tutoriel rédigé

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 7

Total : 922