Aller au contenu principal

Introduction

How to manually advance a stuck gear train.

Pièces

Aucune pièce spécifiée.

  1. Move film door slide on the left side of camera forward. Pull film door open.
    • Move film door slide on the left side of camera forward.

    • Pull film door open.

  2. Fix Kits pour batterie de MacBook

    À partir de $69.99

    Buy Now

    Fix Kits pour batterie de MacBook

    À partir de $69.99

    Buy Now
  3. Locate small silver gear in top left corner of film bay.
    • Locate small silver gear in top left corner of film bay.

  4. Using a plastic opening tool, rotate gear downward until jam is cleared.
    • Using a plastic opening tool, rotate gear downward until jam is cleared.

Conclusion

To reassemble your device, follow these instructions in reverse order.

4 autre(s) ont terminé cette réparation.

Matthew Lessig

Membre depuis le 20/01/2010

54 Réputation

3 tutoriels rédigés

Équipe

Cal Poly, Team 3-18, Maness Winter 2010 Membre de l'équipe Cal Poly, Team 3-18, Maness Winter 2010

CPSU-MANESS-W10S3G18

4 membres

4 tutoriels rédigés

How do you know if the jam is cleared ? I have the same camera but the problem with mine is the shutter button. Every time I press the red and black one it won't make the noise or spit out the film unless I go one button behind. Although when I do that the photo comes out black. I think the two buttons or supposed to be together so when you press the red and black button the one behind it moves in sync. I really need help on fixing it and I'm not sure if what I said made any sense but I need help.

Tiffany - Réponse

I have this very same problem…You explained it perfectly, however, I can’t figure out how to fix it. Please someone help us!

Jordan Brown -

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 6

30 derniers jours : 16

Total : 6,878