Réparez vos affaires Communauté Boutique

Repairing Puppet Strings

Introduction

In order to restring your puppet, you will need:

  • Fishing line
  • Scissors
  • A sewing needle
  • Tape or glue
  • Two equally sized wooden sticks (such as chopsticks or pencils)

Note: The glue, tape, and sticks are only needed if you are restoring a handle, also.

Ce dont vous avez besoin

  1. Repairing Puppet Strings, Repairing Puppet Strings: étape 1, image 1 de 1

    • Detach the severed/damaged strings. This can be done by cutting them or carefully pulling them out.

    Modifier

  2. Repairing Puppet Strings: étape 2, image 1 de 1

    • Thread the fishing line through the needle as you would with thread and tie a simple knot to secure the fishing line.

    • Note: Tying the knot can be tedious, so it may take a few tries.

    Modifier

  3. Repairing Puppet Strings: étape 3, image 1 de 1

    • Insert the needle into a secure part of the puppet's feet or other necessary puppet part.

    • Note: The material may resist the needle at first.

    Modifier

  5. Repairing Puppet Strings: étape 4, image 1 de 2 Repairing Puppet Strings: étape 4, image 2 de 2

    • Pull the needle through the puppet part and tie another simple knot directly onto the location that was threaded through.

    • Note: You may want to tie a few simple knots for extra security.

    Modifier

  6. Repairing Puppet Strings: étape 5, image 1 de 1

    • If you need to make a handle, take the two wooden sticks and cross them to where they are perpendicular to each other.

    Modifier

  7. Repairing Puppet Strings: étape 6, image 1 de 1

    • Secure the two sticks with tape or glue where the two sticks cross.

    • Note: Tape is a faster fix, but may appear messier.

    Modifier

  8. Repairing Puppet Strings: étape 7, image 1 de 1

    • Tie a knot around the stick handle to secure the fishing line. (it may take several knots to secure the fishing line and you can adjust the length as needed with scissors)

    • Note: Repeat the previous steps to other parts of the puppet if necessary.

    Modifier

  9. Repairing Puppet Strings: étape 8, image 1 de 1

    • This is what your puppet should look like.

    • Happy puppet-ing!

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autres ont terminé cette réparation.

Auteur

avec 4 autres contributeurs

Stephanie Gummelt

Membre depuis le 10/27/15

155 Réputation

1 tutoriel rédigé

Badges: 5

+ 2 badges supplémentaires

Équipe

Missouri Western, Team 1-4, Adkins Fall 2015 Membre de l'équipe Missouri Western, Team 1-4, Adkins Fall 2015

MWSU-ADKINS-F15S1G4

2 membres

1 tutoriel rédigé

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 5

30 derniers jours : 31

Total : 2,983